> For the complete documentation index, see [llms.txt](https://help.recart.com/llms.txt). Markdown versions of documentation pages are available by appending `.md` to page URLs; this page is available as [Markdown](https://help.recart.com/getting-started-with-recart/phone-numbers/troubleshooting-message-sending.md).

# Troubleshooting Message Sending

What to check when a campaign is slow or stuck, a subscriber didn't get a message, or a flow isn't sending, plus tips for busy holidays.

Most sending questions come down to a setting or a rule that Recart applies on purpose. Go through the checks below before you contact Support.

***

### A campaign is slow or still "Sending"

* **Subscriber time zone:** if you send by subscriber time zone, the campaign stays in **Sending** until the scheduled time has passed in every subscriber's time zone. This is normal. See [Understanding Time Zones in Recart](https://help.recart.com/compliance-protections/built-in-protections/understanding-time-zones-in-recart.md).
* **Quiet hours:** promotional texts aren't sent between 8 PM and 9 AM in the subscriber's local time. They're held and sent when quiet hours end. See [SMS Quiet Hours](https://help.recart.com/compliance-protections/built-in-protections/understanding-sms-quiet-hours.md).
* **Audience size and sender:** large campaigns take longer to go out. [Short codes](https://help.recart.com/getting-started-with-recart/phone-numbers/short-codes.md) can send more messages per second than toll-free numbers.
* **"Sent" but not received yet:** Sent means Recart has passed every message on for delivery. When mobile networks are busy, delivery can take longer after that.

For what each status means, see [SMS Campaign Statuses Explained](https://help.recart.com/sms/campaigns/sms-campaign-statuses-explained.md).

### Sending during big holidays

Around Black Friday, Cyber Monday and other big holidays, mobile networks carry far more texts than usual, so messages take longer to arrive. What to expect:

* **MMS delays all weekend:** from Black Friday to Cyber Monday, MMS can be delayed for hours, sometimes until after the weekend.
* **Slower SMS campaigns:** a campaign that usually sends in 30 minutes can take much longer. It's still sending, and the rest goes out as network capacity frees up.
* **Quiet hours:** anything not delivered by 8 PM in the subscriber's time zone waits until 9 AM the next day. A large campaign scheduled late in the day may only partly go out that evening.

To keep your sends on time:

* Schedule large campaigns early in the day, so they finish before quiet hours.
* Use SMS, not MMS, for time-sensitive offers.
* Schedule off the hour, for example 9:13 or 2:47, not 9:00 or 9:30. Most brands send on the hour and half hour.
* Space large campaigns at least 15 minutes apart.
* Schedule key campaigns a few days ahead.
* Keep Black Friday and Cyber Monday campaigns simple: one SMS message, built on segments you've created a few days before.
* Send a test to yourself first. See [Test Recart SMS Messages](https://help.recart.com/sms/getting-started/test-recart-sms-messages.md).

More tips: [BFCM #6 - Smart Sending Starts Now](https://help.recart.com/holiday-playbooks/bfcm/6-smart-sending.md).

### A subscriber didn't get a message

Open the subscriber's profile from [Subscribers](https://app.recart.com/subscribers) and check:

* **Are they subscribed to SMS?** Their subscription history shows if they replied STOP, unsubscribed, or were removed by [Automated List Cleaning](https://help.recart.com/compliance-protections/built-in-protections/automated-list-cleaning.md) (for example a deactivated number or a landline).
* **Were they in the audience?** Check the segment or list the campaign targeted, and any segment it excluded.
* **Smart Sending:** if they received a promotional text in the last few hours (8 by default), a campaign or the first abandonment message is skipped. It isn't sent later. See [SMS Smart Sending](https://help.recart.com/compliance-protections/built-in-protections/sms-smart-sending.md).
* **Abandonment limit:** a subscriber gets at most one abandonment message every 48 hours across browse, cart and checkout. See [SMS Abandonment](https://help.recart.com/sms/automated-flows/abandonment-flows.md#how-often-subscribers-receive-abandonment-messages).
* **Quiet hours:** the message may be waiting for 9 AM in their time zone.
* **Country and sender:** check your sender can text their country. See [One-way vs Two-way Messaging](https://help.recart.com/getting-started-with-recart/phone-numbers/one-way-vs-two-way-messaging.md).
* **Message content:** carriers can block texts with prohibited or spam-like content. See [SMS Compliance and Deliverability](https://help.recart.com/compliance-protections/required-compliance/sms-compliance-and-deliverability.md).
* **Their phone:** the number may be blocked on their phone, or texts from unknown numbers may be filtered into a separate list. Ask them to save your number with a [Contact Card](https://help.recart.com/sms/getting-started/contact-card-the-easiest-way-for-your-subscribers-to-save-your-number.md).

### A flow isn't sending

* **Is the flow active?** Check the flow and each message in it are active.
* **Trigger and conditions:** check the trigger, delays and conditional splits match what you expect.
* **Opt-in tools:** new subscribers only get a welcome message if the opt-in tool is connected to an active welcome flow.
* **Smart Sending and the abandonment limit** apply to abandonment flows too (see above).
* **Account suspended:** if a payment failed and your account is suspended, only Welcome and Help flows send. See [Failed Payment Policy & Suspended State](https://help.recart.com/billing/failed-payment-policy-suspended-state.md).

### A campaign failed or can't be sent

* **Your number isn't verified yet:** campaigns can only be sent once your dedicated toll-free number is verified. See [Getting Started with Toll-Free Numbers](https://help.recart.com/getting-started-with-recart/phone-numbers/getting-started-with-toll-free-numbers.md).
* **Status shows Failed:** this can happen if your SMS subscription isn't active, or you've reached the sending limit of your trial. Contact Support.

### Still stuck? Contact Support

Email <support@recart.com> or use the chat in your dashboard, and include:

* The campaign or flow name
* When it was scheduled or triggered
* A few phone numbers that didn't receive it, and when you expected them to
* A screenshot, if you have one

During Black Friday and Cyber Monday, Support works extended hours. See [BFCM #9 - Survive Crunch Week Like a Pro](https://help.recart.com/holiday-playbooks/bfcm/9-survive-crunch-week.md).

If you have any questions, do not hesitate to [contact the Recart Support team.](https://help.recart.com/contact-recart-support.md) We'd be happy to help!


---

# Agent Instructions
This documentation is published with GitBook. GitBook is the documentation platform designed so that both humans and AI agents can read, navigate, and reason over technical content effectively. Learn more at gitbook.com.

## Querying This Documentation
If you need additional information that is not directly available in this page, you can query the documentation by asking a question.

Perform an HTTP GET request on the following URL with the `ask` and `goal` query parameters:

```
GET https://help.recart.com/getting-started-with-recart/phone-numbers/troubleshooting-message-sending.md?ask=<question>&goal=<user_goal>
```

`ask` is the immediate question: it should be specific, self-contained, and written in natural language.
`goal` is what the user is ultimately trying to achieve, the reason they need the answer. Sharing it helps GitBook give you a better, more relevant answer. A goal is most helpful when it describes the outcome the user wants rather than restating the question. For example, with `ask=how do I create an API token`, a goal like `automate deployments from our CI pipeline` lets GitBook tailor the answer to that use case.

The response will contain a direct answer to the question and relevant excerpts and sources from the documentation.

Use this mechanism when the answer is not explicitly present in the current page, you need clarification or additional context, or you want to retrieve related documentation sections.
